|
|
1
|
|
2
|
|
3
|
|
4
|
|
5
|
|
6
|
|
7
|
PR84-AGCO-Gleaner (#2) 770-813-9200
Larger Image
ANNIVERSARY LOGO--Gleaner, a division of AGCO Corporation, will use a special 85th anniversary logo on all Gleaners produced for the 2008 season. The logo celebrates 85 years of innovations that have revolutionized the industry and continue to provide solutions for farmers. For more information, call 770-813-9200, or visit www.agcocorp.com.
PR83-AGCO-Tractor 770-813-9200
Larger Image
FRONT SUSPENSION SYSTEM--AGCO high horsepower DT and RT Series tractors equipped with CVT transmissions and HydraMaxx front suspension systems operate at speeds of up to 32 mph. HydraMaxx eliminates power hop and minimizes wheel slippage for more fuel efficient operation and a smoother ride. For more information, call a local AGCO dealer or 770-813-9200, or visit www.agcocorp.com.
PR21-Agra Placements Ltd. 316-733-7701, ext 24
Larger Image
FARM JOBS--Agra Placements Ltd., Andover, Kan., specializes in providing opportunities and listings for farm and ranch, chemical sales, and agriculture positions. Fill out an application form to receive information from one of its specialists. For more information, call 888-696-5624, ext. 4, or visit www.agraplacements.com.
PR8-Alltech South Dakota 605-692-5310
Larger Image
As most producers are aware, a profitable cow-calf and feedlot operation depends heavily on herd health. With more intense management programs, stressful transports, extreme environmental conditions and the ever-present pathogenic disease challenges, keeping animals healthy and productive has proven quite challenging.(Read More)
PR57 -B&J Enterprises 620-939-4745
Fed up with high heating costs? As energy prices climb, waste oil heat is gaining popularity. Not only does waste oil heat reduce heating bills, it also eliminates the cost to haul used oil off-site. Waste oil heaters usually pay for themselves in one heating season--a warmer shop can lead to higher productivity. To save thousands of dollars each year just 500 to 1,000 gallons is all the used oil you need. (Read More)
PR22-Bayer CropScience-CORN 919-549-2000
Larger Image
Cloud County Community College (CCCC), Concordia, Kan., in partnership with Manhattan Area Technical College (MATC), Manhattan, Kan., is the only college in Kansas to offer an Associate of Applied Science degree in wind energy technology. (Read More)
PR88-Bayer CropScience-WHEAT 919-549-2000
Cloud County Community College (CCCC), Concordia, Kan., in partnership with Manhattan Area Technical College (MATC), Manhattan, Kan., is the only college in Kansas to offer an Associate of Applied Science degree in wind energy technology. (Read More)
PR58-Boehringer Ingelheim Vetmedica Inc. 800-821-7467
Larger Image
Boehringer Ingelheim Vetmedica, Inc., (BIVI), St. Joseph, Mo., announces the U.S. Animal and Plant Health Inspection Service has approved a duration of immunity (DOI) claim for Ingelvac CircoFLEX of at least four months for porcine circovirus type 2 (PCV2), the primary pathogen for porcine circovirus associated disease (PCVAD).(Read More)
PR66-Brillion Iron Works Inc 800-409-9749
ZONE/STRIP TILLAGE HYBRID UNIT--Brillion Iron Works, Inc., Brillion, Wis., introduces the Brillion Hybrid Unit, which offers the flexibility to improve yields and reduce input costs in one unit. As a folded unit, the Hybrid center section uses six heavy-duty Zone Commander shanks on 30-inch spacing for zone tillage to 22 inches deep. The 22-inch spring loaded coulters in front cut through residue and the one and a half-inch straight-leg shanks lift the soil to eliminate compaction zones. When unfolded, the Hybrid Unit can be used as a 12 shank strip-till unit to work 8 to 12 inches deep. The wings feature a heavy-duty chisel shank with 32" of shank clearance. The additional clearance improves trash flow for operating in heavy residue. For strip tilling, the straight legs on the center section are replaced with a new shank leg and narrow fertilizer point for minimum disturbance in all soil conditions. For more information, call 800-409-9749, or visit www.brillionfarmeq.com.
PR68-Case IH 262-636-5268
Larger Image
POWERFUL TRACTOR--Case IH, Racine, Wis., will introduce the most powerful Magnum tractor, the Magnum 335, in 2008. Rated at 275 PTO (205 kW) horsepower, with 13 percent power growth and 47 percent torque rise, the Magnum 335 standard features include a proven 9-liter Case IH engine with new fuel-saving combustion design; a new heavy-duty MFD axle design to bring more power to the ground; and a new Cat IVN / III hitch and Cat IV drawbar to handle today's largest and heaviest implements The enhanced 9-liter engine on the Magnum 335 has a 2100-RPM rated engine speed. This same fuel-saving 9-liter power plant also is being introduced in the 275 and 305 series Magnums in 2008, with a rated engine speed of 2000 RPM. The well-accepted 8.3-liter engine remains standard on the Magnum 215 and 245. For more information, call a local Case IH dealer, or visit www.caseih.com.
PR105-Central City Scale
Larger Image
LIVESTOCK WEIGHING--Central City Scale-Avery Weigh Tronix, Central City, Neb., offers Corral Weigh, ideal for livestock weighing and herd management. The system is suited for conversion of a manual or hydraulic livestock squeeze chute into a working livestock scale. It offers a 5,000 or 10,000 pound gross weighing capacity, a low profile and easy mounting under manual or hydraulic chutes. The Corral Weigh also has weigh bar cables, made of tough polyurethane, 20 feet long, with weatherproof construction and an aerospace-developed sealing agent for ultimate protection. The indicator is compatible with various EID software packages. For more information, call 308-946-3591 or visit www.ccscales.com.
PR18-Central City Scale, Inc 308-946-3591
Larger Image
WEIGHT INDICATORS--Central City Scale, Inc., Central City, Neb., introduces the new Model 640 and 640M, both multi-feature indicators complete with 100 alpha-numeric memory channels that can track yields of individual fields or the entire harvest season. The Model 640M is the little brother to the 640 and available in a small, compact design that makes it ideal for places with limited space. Reports can be easily transferred to a printer or Transfer Data System for accurate records. Both units feature the new Auto-Loc capabilities for livestock. Other features include a large backlit display, optional wireless interface to remote display, enhanced motion filtering for settling down weight display, several different formatted printouts, hold mode, sleep mode, and more. For more information call 308-946-3591 or visit www.ccscales.com.
PR98-CLAAS of America
Larger Image
ROUND BALERS--CLAAS of America, Inc., Omaha, Neb., adds five new models to its line of ROLLANT round balers, including the 260, 340, 350RC (ROTO CUT), 355RC and the 355RC UNIWRAP. The models allow for volume and tying delay adjustments with the new CLAAS standard control terminal, pick up widths of 71 to 83 inches, and automatic tying with net, twine or combo. With 4'x4' and 4'x5' fixed bale chambers available, a newly designed MPS (Maximum Pressure System - available on the 350RC, 355RC, 355RC UNIWRAP models) which takes less horsepower; the ROLLANT series offers unmatched reliability while providing the ultimate in efficiency, simplicity and durability. For more information, call a local CLAAS of America dealer, or visit www.claasofamerica.com.
PR70-CLAAS of America Inc 402-861-1000
Larger Image
CORN HEADS--CLAAS of America, Inc., introduces the new ORBIS 600 and 750 corn head, for optimal crop flow. Equipped with mechanical contour technology to follow the topography of the field, each model adjusts smoothly to field conditions while providing ideal lateral compensation. Rotation of the self-sharpening, carbide coated knives and large diameter gathering discs (four large diameter and two additional small diameter discs on the ORBIS 750) allows for safe transport of tall or short corn and gentle treatment of loose cobs to the feed rollers. The new turning direction of the two-center gathering discs aides in poor feeding conditions. The row independent ORBIS corn heads offer a 20-foot (eight 30-inch rows) working width with the ORBIS 600 and up to 25-foot (10 30-inch rows) working widths with the ORBIS 750. For more information, call 402-861-1000, or visit www.classofamerican.com.
PR59-Cloud County Community College/MATC 800-729-5101, ext. 256
NEW PROGRAM--Bruce Graham, wind energy technology instructor at Cloud County Community College, climbs a wind turbine tower during recent training sponsored by Bergey WindPower in Norman, Okla. (Photo courtesy CCCC.)
|
